If using a gravel board ensure it is level. Mark on the post the height of the new fence
Mark 150mm from the bottom and 150mm from the top of the panel. Mark the centre of the post
Use this position for fixing the clips. Slide the fence panel through the clips
Fix the panel to the clips. Finish with some end caps
If using concrete posts and gravel board, slide in the concrete gravel board
Double check the gravel board is level. Slide the fence panel through the grooves
Materials needed
- Fence Panel
- Post - Timber or Concrete
- Gravel Board - Timber or Concrete
- Fence Clips
- Fence Caps
- Screws
Tools needed
- Spirit Level
- Sledge Hammer
- Tape Measure
- Pencil
- Cordless Drill
PPE needed
- Gloves
- Safety Goggles
Watch the video now...