Dacatie TF Multicloser Cavity Closer 100 - 150 x 2400mm

The TF-Multicloser is a versatile insulated cavity closer that is easy
to use to achieve building regulations where cavity widths are
100mm-150mm.

It has pre cut grooves to simplify cutting the closer to the required cavity width.

• The closer will suit 100mm, 110mm, 125mm and 150mm cavity widths.
  
• Simply cut along the groove of the appropriate cavity width with a
  sharp knife - For 150mm cavities no trimming is required, there are
  pre-cut grooves to adjust for 125, 110 or 100mm cavities
  
• Cut the profile to the respective height and widths of the cavity
  opening and then push fit into the cavity alternatively build into the
  cavity using Dacatie’s DTU fixing ties
  
• Suitable for first or second fix - When you are using the closer in
  a second fix application the vertical section should be a minimum of
  50mm greater in height than the opening
  
• The ribbed surface of TF-Multicloser will accept wet plaster, or plasterboard on dabs
  
• Best practice would suggest priming the closer surface prior to finishing
  
• TF-Multicloser is available in 2.4mtr lengths and suitable for cavities between 100mm and 150mm
  
• Reduces risk of condensation and moisture across the cavity
  
• Manufactured with 50% recycled material (a blend of post-consumer and/or post-industrial recycled material)
  
• Dacaties closer insulation has no CFC's, HCFC's in the
  manufacturing process and represents no known threat to the environment
  
• Helps reduce heat loss
  
• BBA approved