Treatex Classic Colour Collection Battleship Grey 1L

Treatex Classic Colour Collection works best on unfinished timber. Previous porous finishes should be thoroughly cleaned or lightly sanded before overcoating. Flaking or peeling finishes must be fully removed prior to application. A trial application is essential when overcoating another finish. Ensure the timber is dry and free from possible contaminates e.g. algae, grease, dirt, dust etc. Exterior timbers susceptible to decay, mould and fungi should be treated first with Treatex Preservative. To help prevent staining, exterior timbers with high tannin levels (e.g. oak, idigbo, teak, cedar, mahogany) should be treated with Treatex Stain Inhibitor. We advise that when using Treatex Classic Colour Collection, sufficient product is purchased to complete the whole project and when more than one tin is required it is advisable to mix them together before use. Timber must have a moisture content below 18%

• High coverage
• Resistant: Highly water-resistant
• 
  Will not flake or peel
• 
  Contains no biocides or preservatives
  
•  Suitable for: internal and external use
  Recommended timbers: All Applications: doors, windows, fences, sheds, cladding and kitchen cabinets
  
• Coverage: 1L covers approximately 25m² in one coat depending on the timber and method of application.