Treatex Hardwax Oil Antique Oak 2.5L

Preparation:   If the surface to be treated is rough or if a previous surface coating finish is present, sand to smooth bare wood with 80-120 grit sandpaper. Most previously oiled surfaces can be overcoated without sanding. When overcoating a previously oiled surface, a trial application is essential. Remove dust, dirt, and any contaminants which may lead to uneven absorption of Treatex Hardwax Oil. Make sure the surface to be treated is thoroughly dry. Stir in and ensure the product is at room temperature before use.
 
Application:   Apply Treatex Colour Tone using a brush or roller evenly, allowing roughly 30g per m2. Allow to dry – maintaining warmth and ventilation will enable the surface to dry within 3-6 hours. Then apply with a brush or roller a second & third coat of Treatex Hardwax Oil again, allowing roughly 30g per m2. Allow drying thoroughly overnight before the surface is lightly used. The surface will reach maximum hardness after a further 24 hours.